Ghost Immobiliser Installation in London

Securemycar is dedicated to helping car owners in London protect their vehicles against modern theft techniques like relay attacks and key cloning, using the advanced Autowatch Ghost II. Instead of relying on key fobs, signals, or visible hardware like the factory system, Ghost II requires a unique password entered through your vehicle’s control before the engines can start. As trusted London mobile vehicle security specialist, we offer certified, expert installation at your home, workplace, or our workshop. With strong reputation built around quality workmanship, we deliver discreet protection you can depend on.  

Why Modern Cars in London Need Advanced Protection

Criminal methods are more sophisticated

Instead of just breaking through the window, mordern thieves are uses technologies like relay attacks, smart key cloning, and signal amplification to unlock and start mordern cars without even touching your key. However, by using advanced security protection like our Autowatch Ghost II immobilizer, you can eliminate every digital vulnerabilities as it requires sequential secret password before engines can start. 

Urban environments have higher theft exposure

Urban living brings convenience, but with conditions like shared parking, busy residential roads, and congested streets that thieves use to their advantage, to target unattended vehicles, it can be a little risky. Recent statistics show that the number of vehicle theft remain relatively high, with tens of thousands of cars reported as stolen across the UK. In situation like this, advanced vehicle protection system like the Autowatch Ghost II is your best defence, not just locking doors. 

Connected systems introduce new vulnerabilities

Modern cars are built with NextGen technology. From keyless entry to app-linked diagnostics, everything is interconnected. However, even though this sounds great, the connectivity feature creates a loophole that can be exploited if you don’t add an extra layer of security. Our range of security products, from GPS trackers, to approved immobilisers, to call alert centres, gives you that critical layer of protection, that puts you ahead of the criminals. 

Insurance requirements are tightening

To respond to the increase in vehicle theft rates, insurance providers tightened their requirements. In order for you to be eligible for certain discounts or policies, your vehicle must have Thatcham-approved immobilisers and trackers installed by certified technicians. By working with us, not only will your vehicle be protected, every installations will be conducted in line with the latest insurance policies, saving you money through reduced premium. 

Recovery chances improve with smart security

If the worse happens, whether your car is towed it moved, your alarm will be triggered in standard system. But with smart security system, you can recover your your vehicle quickly as has advanced trackers that provide live location data in edustely the alarm is trggered. This proactive measure greatly improves your chances of recovery, helping you turn a messy situation completely under your control. 

What Is the Autowatch Ghost 2 Immobiliser?

The Autowatch Ghost 2 immobiliser is one of the most sophisticated vehicle security system you will find in the UK today. This advanced defense system is designed to protect your car from mordern theft methods like relay attacks, unauthorised stats, and key cloning. Check below for more details. 

• PIN sequence via steering wheel controls

The most powerful features of the Ghost 2 security is it’s unique user-defined code that must be entered using the in-built button on your car such as the dashboard switches, centre control keys, or steering wheel control key before the vehicle can start. 

• No radio signal transmission

While the conventional security system rely on radio frequency transmission, the Ghost 2 doesn’t. It has no key fob, remote signal that can be intercepted, or RF transmission that thieves can pick up. 

• Invisible installation

Ghost 2 is convertly installed within your car with no visible LED lights, alarm sirens, external components, or third-part wiring looms that could tip the thief off. 

• Works with existing vehicle systems

You don’t need to change your car key or buy new hardware before Ghost II can work. It integrates with your Electronic Control Unit (ECU), and CAN data network, allowing it to authorise engine start without affecting your normal driving routine. 

• TASSA approved

The Autowatch Ghost 2 Immobiliser is TASSA approved, which means it meets the standard requirement for third-party vehicle security installation and performance. 

Ghost 2 Key Features & Benefits

Real Theft Prevention

• Prevents key cloning
  Key cloning is one of the techniques thieves use to steal vehicles with the traditional keyless system. Since Ghost II does not use key signals at all, it renders this method useless.

• Stops relay theft
  Thieves use signal boosters to intercept the frequency to trick your car into believing that a key is present. But because Ghost II doesn’t emit any signal, it is completely immune to this technique which is known as relay theft. 

• Blocks unauthorised engine start
  Tradditional immobilisers can be easily bypassed by cutting wires, the Ghost II interacts directly with the CAN Bus data system of your vehicle, sending stop command to the engine management system to render the vehicle immobile until the correct password is entered.

Discreet &Undetectable

• No LED lights
  Ghost II has no red light or button that gives out its location. This makes it impossible for a thief sitting in the driver’s seat to whether or not you have installed an immobilizer, leaving them confused while your vehicle remains in the same spot.

• No RF signals
  Ghost II is a silent device that does not emit radio frequency signal, making it impossible for diagnostic tools and scanners used by mordern criminals to detect it, giving your vehicle and extra layer of security that just can’t be found.

• Hidden installation
  The Ghost II is an incredibly small device, which makes it easy for technicians to hide it within the vehicle’s wiring harness, making it impossible to be found or removed by thieves. 

Smart Operation

• PIN-to-drive sequence
  The Ghost II allows you to use an existing button on your centre console, steering wheel, or door panels to create a unique disarm sequence that will be required to start your car. Without knowing this pin-to-drive sequence, your vehicle will remain stationary.

• Optional Bluetooth disarm
  If you want everyday convenience without compromising safety, you can use the Bluetooth disarming feature of Ghost II to unlock and start your vehicle when your authorised phone is within range and the app is running.

• Service/valet mode

Sometimes, you may need temporary access to your vehicle, maybe for car washing or mechanical service. The service/valet mode feature of Ghost II allow you to bypass the PIN requirement without compromising the safety of your car. 

Why Choose Secure My Car for Ghost Installation in London

London-based mobile installation

You don’t have to come down to our workshop just to get Ghost II installed. Our mobile London based certified technicians can come down to your home or office to carryout the installation without an extra cost. 

Authorised Autowatch installer

We are authorised installer of Autowatch Ghost immobiliser, one of the most effective antitheft solutions in the UK. This means by partnering with us, you will be you will be getting the original Ghost system, not the cloned one. 

Experienced technicians

Your vehicle is valuable, and shall be treated as such. The installation of your Ghost II system will be carried out by technicians who are highly trained and experienced in handling all Ghost system models. 

Professional wiring standards

A properly installed Ghost immobiliser should be completely invisible to everyone. We ensure our team abide by the industry-leading wiring standards, and integrate the new system into the existing CAN network of your vehicle, so there’s nothing indicating third party installation. 

No rushed installs

Instead of just rushing through the process, we dedicate a minimum of 2 to 3 hours just to get it right, then we test, verify and guide you through how your system works before leaving. 

Aftercare support

We aren’t going to ghost you after installing your system. We hang around to provide ongoing support once we are done so that we can help you with further support as may be needed. 

Ghost Immobiliser vs Tracker – Do You Need Both?

Immobiliser stops theft

A Ghost immobilizer is a preventive measure: stops theft before it happens. Prevents the engine from starting unless the correct pin sequence is entered through an existing button on a steering wheel, or door panel. 

Tracker recovers vehicle

A tracker only helps with the recovery process. Using GPS technology, it tracks location in real-time, allowing authorities to easily trace and recover the vehicle. 

Best protection combines both

The best security complement immobilisers with trackers. While the immobiliser prevents theft from ever happening, tracker hastens the recovery process in the most unlikely situation. 

Advice based on vehicle value

The higher the value of your vehicle, the more you need to implement a dual layer protection. If your vehicle is averagely priced, the most cost effective solution for you is the immobiliser. But if you have a mid or high valued car, it is best to combine both immobiliser and tracker. 

H2: Installation Process – What to Expect

Expert Pre-Installation Check

Before we carryout installations, we first of all assess your vehicle to determine its make, model, and wiring so that we can develop the best integration strategy. 

Professional Immobiliser Fitment

Then we discreetly fit the Autowatch Ghost II immobilizer into the CAN Bus network of your vehicle, concealing it completely from external units, key fobs, and traceable signals. 

PIN Coding & Configuration

At this stage, we program a unique disarm PIN using the existing button on your vehicle’s dash control or steering wheel, making it impossible for thieves to drive away your car without access to the right sequence. 

Full System Testing

This is where we test every function of your new system to ensure it is working seamlessly, stopping engine from working unless the right password is provided. 

Customer Walk-Through & Training

This stage is where we provide a step-by-step guide on how you can arm or disarm, reset codes, and use barley/service mode when needed so you can operate your newly upgraded system with confidence.